Top and bottom rails match measurements of 2” wide by 3.5” tall. Spans greater than 4 feet require an insert for maximum support. Rail will span 8 feet without a support with a 42" post. Rail will span 10 feet without a support with a 36" post. Bottom rail is designed to sit 2” off floor. Railing is available in 36” and 42” rail height (top rail height above grade). Choose from 2 baluster styles (square or colonial*). Baluster spacing is custom routed on each panel to meet building code specifications.
*Colonial Balusters only available in 36" heights for
Style C and Style S rail.
**Slope available up to 8' lengths
Square Picket Rail Set
Our S vinyl railing has a 2" x 3 1/2" top & bottom rail that is designed to sit 2" off the ground. Kit measurements 36" high and 6' or 8' wide.
Colonial Picket Rail Set
Our S vinyl railing has 2" x 3 1/2" top & bottom railacross that is designed to sit 2" off the ground. Kit measurements 36" high and 6' or 8' wide.
4"x4" Flat Cap
Covers the top of your 4"x4" post sleeve. We recommend using PVC cement to hold your cap in place.
4"x4" Gothic Cap
Covers the top of your 4"x4" post sleeve. We recommend PVC cement to hold your cap in place.
4"x4" New England Cap
Covers the top of your 4"x4" post sleeve. We recommend using PVC cement to hold your cap in place.
5"x5" Ball Cap
Covers the top of your 4"x4" post sleeve. We recommend using PVC cement to hold your cap in place.
S-Rail Bracket Set
Need an extra set of brackets for your S-Rail kit? Set includes 2 top and 2 bottom brackets
Adjustable Angle Bracket
Adjustable Angle Bracket moves freely from side to side, allowing for that special application such as an octagon shaped gazebo.
5"x5"x38" Post
The 5x5x38 post can be used as a sleeve to cover your existing post or you can use one of our mounting systems to install your post.
5"x5"x44" Post
The 5x5x44 post can be used as a sleeve to cover your existing post or you can use one of our mounting systems to install your post. Our 44" posts are often used at the bottom of steps to attach our slope rail.
Column Wrap 6"x6"x10'
Our 6in x 6in x 10ft Column Wrap comes 1 per order. Each Column Wrap can be adjusted from 5 inches up to 6 inches.It's special interlocking teeth design helps it to fit snug around your post.
Column Wrap 8"x8"x10'
It's special interlocking teeth design helps it to fit snug around your post.
Also Available in 10"x10"x10" and 12"x12"x12" as special order.
The easiest mounting system for vinyl posts 5"x5"x36". Mounts to concrete, wood, composite, or vinyl surfaces. Engineered to provide both strength and stability not found in traditional post mounting systems. These items only come with concrete anchors, wood anchors sold separately.
4"x4" New England Skirt
A great accent to add to your 4"x4" post. Fits over your post. Just slide it to the bottom for a stylish look.
18" Flange Mount
Our 18" Steel Flange mounting system comes with lag screws. You will need to purchase concrete from your local hardware store to complete installation. Flange is 18 inches tall.
4"x4" Modulous Post Mount
A great accent to add to your 4"x4" post. Fits over your post. Just slide it to the bottom for a stylish look.
Tek-Mount Kit
Makes installing a 5x5 vinyl post easy! Each kit comes with a New England skirt, the Easy Mount, screws, and easy to follow instructions.
